FRB9/200 SKF Locating Ring Shields The "E" in the part

The "E" in the part number signifies an enhanced bearing design

The "E" in the part number signifies an enhanced design with improved internal geometry

C - Dynamic load 63

Sealing Shield on one side

FRB9/200 SKF Locating Ring Shields The "E" in the partA bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.